What does an AV receiver cost to run?

A 7.2-channel receiver at normal listening levels. At the US average rate of 18.34¢ per kilowatt-hour that is $30 a year.

Electronics and computing · Rated 130 W · 100% duty cycle

Running cost, US average rate

$30a year

165 kWh a year · $2.53 a month · 151 W average draw

Rated 130 W, drawing that for 100% of the 3 hours a day it is in service, 365 days a year.

130 W while running never cycles — the plate is right for once

Run the numbers on your own use

Change any of these and the figures update. The defaults are the typical case described above; your rate is the input that moves the answer most.

Residential average for June 2026, from the EIA. Your own tariff may differ; you can read it off your bill.

130 W
100%
3 h/day
365 days/yr
A year
$30
A month
$2.53
Electricity
165 kWh
Average draw
151 W

In the US average at 18.34¢ per kWh. Nameplate arithmetic would say 142 kWh0.9× too high.

Why this is lower than the number you will see elsewhere

Almost every published answer to this question multiplies the rating on the label by the hours the appliance is switched on. For an AV receiver that gives 142 kWh a year, or $26.

Draw depends on volume and how many channels are driven, but a receiver idles at a substantial fraction of its playing draw — the output stage is biased on regardless.

Nameplate × hours — the usual answer142 kWh$26
What it actually draws165 kWh$30

The arithmetic, step by step

Nothing here is hidden, so you can check it or change it. Working in the order the formula runs:

  1. 130 W — what it draws while it is actually drawing. This is the rating on the plate.
  2. × 100% — the share of its in-service time it is really pulling that. Draw depends on volume and how many channels are driven, but a receiver idles at a substantial fraction of its playing draw — the output stage is biased on regardless.
    That gives 130 W averaged across the hours it is on.
  3. × 3 hours a day × 365 days — A 7.2-channel receiver at normal listening levels.
    130 × 3 × 365 ÷ 1,000 = 142 kWh a year.
  4. + standby — 3 W for the other 21.0 hours a day, which is 23 kWh a year. People leave this out and it is not always small.
  5. × 18.34¢ — the US average residential rate for June 2026.
    165 kWh × 18.34¢ = $30 a year.

Change any assumption in the calculator above and every figure on this page moves with it. The two that matter most are your rate, which varies 4× across the country, and the hours — the duty cycle is a property of the appliance, but the hours are a property of you.

How sensitive is that number?

A single figure invites more confidence than it deserves. Here is the same appliance under assumptions either side of the default, so you can see how much of the answer is the appliance and how much is the guess about how you use it.

Everything else held at the default. The spread here is the honest error bar on the headline figure.

If…ElectricityA yearvs default
You use it half as much (1.50 h/day)96 kWh$18-42%
You use it 50% more (4.50 h/day)235 kWh$43+42%
It is a smaller unit (50 W)78 kWh$14-53%
It is a larger unit (350 W)406 kWh$75+146%
You are in Nevada (13.11¢)165 kWh$22-29%
You are in Hawaii (52.72¢)165 kWh$87+187%

What it costs per hour, day and month

At 18.34¢ per kWh, the US residential average for June 2026.

PeriodElectricityCost
Per hour in use0.2 kWh2.8¢
Per day in use0.5 kWh$0.08
Per month14 kWh$2.53
Per year165 kWh$30
Over ten years1,653 kWh$303

The thing worth knowing

The rated output is not the draw. A receiver advertised at 7 × 100 W cannot deliver 700 W to speakers and does not draw it — real listening levels use a few watts per channel, and the great majority of what it consumes goes into keeping the output stage biased and the electronics alive. A network-enabled receiver in standby with Wi-Fi kept awake can draw ten times what an old one did.

What it costs in your state

The appliance is the same everywhere; the rate is not. Running this AV receiver costs $87 a year in Hawaii and $22 in Nevada — a difference of 4×.

Cost of running one AV receiver for a year, by state. Residential average price, EIA June 2026.

StateRatePer yearPer month
Hawaii52.72¢$87$7.26
California34.74¢$57$4.79
Massachusetts29.61¢$49$4.08
Maine29.59¢$49$4.08
New York29.49¢$49$4.06
Rhode Island29.23¢$48$4.03
Alaska28.21¢$47$3.89
New Hampshire27.01¢$45$3.72
New Jersey24.95¢$41$3.44
Vermont24.44¢$40$3.37
District of Columbia24.39¢$40$3.36
Connecticut24.32¢$40$3.35
Michigan22.99¢$38$3.17
Maryland21.84¢$36$3.01
Pennsylvania21.73¢$36$2.99
Illinois19.89¢$33$2.74
Wisconsin19.56¢$32$2.70
Delaware19.29¢$32$2.66
Ohio19.19¢$32$2.64
Minnesota17.52¢$29$2.41
Indiana17.51¢$29$2.41
Virginia17.22¢$28$2.37
Colorado17.13¢$28$2.36
Alabama16.4¢$27$2.26
Georgia16.36¢$27$2.25
Oregon16.32¢$27$2.25
Missouri16.22¢$27$2.23
Texas15.94¢$26$2.20
Iowa15.93¢$26$2.19
Kansas15.71¢$26$2.16
South Carolina15.55¢$26$2.14
West Virginia15.45¢$26$2.13
South Dakota15.36¢$25$2.12
Wyoming15.24¢$25$2.10
Arizona15.18¢$25$2.09
Montana15.14¢$25$2.09
Florida15.1¢$25$2.08
New Mexico15.06¢$25$2.08
Washington14.91¢$25$2.05
Mississippi14.88¢$25$2.05
North Carolina14.74¢$24$2.03
Idaho14.37¢$24$1.98
Oklahoma14.33¢$24$1.97
Kentucky14.26¢$24$1.96
Arkansas14.12¢$23$1.95
North Dakota14.12¢$23$1.95
Tennessee14.07¢$23$1.94
Louisiana13.49¢$22$1.86
Utah13.37¢$22$1.84
Nebraska13.25¢$22$1.83
Nevada13.11¢$22$1.81

Questions

How much electricity does an AV receiver use?
About 165 kWh a year on the assumptions above — a 7.2-channel receiver at normal listening levels. That works out to an average draw of 151 W over the hours it is in service, against a rated 130 W.
Is it expensive to run an AV receiver?
At the US average residential rate of 18.34¢ per kWh it costs about $30 a year, or $2.53 a month. The same appliance costs about $22 a year in Nevada and $87 in Hawaii, because the rate matters more than the appliance.
Why is your figure lower than other sites?
Because 130 W is what the appliance draws while it is actually drawing, not the average over the time it is switched on. Draw depends on volume and how many channels are driven, but a receiver idles at a substantial fraction of its playing draw — the output stage is biased on regardless. Multiplying the rating by the hours gives 142 kWh a year, which is 0.9× the real figure.
What is the cheapest way to run an AV receiver?
Turn off the network standby setting unless you genuinely wake it from an app. That is usually the difference between 0.5 W and 8 W around the clock.

Source: U.S. Energy Information Administration, Electric Power Monthly, Table 5.6.A, June 2026. U.S. Government work, public domain.

How every figure on this page is computed · Where the data comes from